Keeping your windows and window tracks clean is an important part of home maintenance. Dirty window tracks can detract from your home’s appearance, allow more dust and allergens to enter your home, and even prevent your windows from opening and closing properly. Fortunately, with just a few simple tools and steps, you can easily learn how to clean window tracks and keep them looking their best.
Why It’s Important to Clean Your Window Tracks
Window tracks (also sometimes called window channels or window sills) are the horizontal and vertical tracks that your windows slide along when opening and closing. These tracks easily accumulate dirt, debris, bugs, and dust over time. Here are some of the main reasons why regular window track cleaning is essential:
- Improve appearance – dirty window tracks are an eyesore and make your windows and home exterior look unkept and neglected. Keeping them clean enhances curb appeal.
- Remove allergens – dust, pet dander, pollen and other allergens can collect in window tracks. Cleaning them regularly helps improve indoor air quality.
- Prevent damage – debris that collects in tracks can interfere with the proper raising, lowering, and sealing of windows. This can lead to windows getting stuck.
- Extend window lifespan – dirt buildup can rub against moving window parts each time they’re opened. This friction can slowly damage window components.
- Let light shine in – dirty tracks block light from coming in through the glass. Clean tracks enhance natural illumination.
Fortunately, with regular simple cleanings, you can prevent all these issues and keep your window tracks looking and functioning like new.
What You Need to Clean Window Tracks
Cleaning window tracks doesn’t require fancy tools or harsh chemicals. Here are the basic supplies you’ll need:
- Old toothbrush or other small scrub brush
- Microfiber cloths
- Bucket of warm water
- Mild dish soap or other gentle cleaning product
- Small vacuum nozzle attachment
- Old towels
- Gloves
- Step stool or ladder
For really dirty window tracks, you may also find the following helpful:
- Old chopstick or cotton swabs (for cleaning in crevices)
- Small screwdriver or flat head knife (for scraping out debris)
- Tweezers or needle nose pliers (for pulling out bugs/stuck debris)
- Soft plastic putty knife (for gently scraping)
- Optional: rubber squeegee, stainless steel cleaner
The most important thing is using tools that are small enough to maneuver inside the track openings. Avoid anything too bulky.
How to Clean Window Tracks in 5 Steps
Follow these simple steps to thoroughly clean dust and debris out of your window tracks.
Step 1: Vacuum the Tracks
The first step is using a handheld vacuum nozzle attachment to suck up all the loose dirt and debris you can from the tracks. Make sure the vacuum head is small enough to fit inside both the horizontal and vertical tracks.
Run the nozzle attachment slowly over the entire length of each track, angling the suction to reach inside. This will instantly remove a lot of the surface level dust and debris.
Step 2: Wipe with Warm Soapy Water
Next, dip a microfiber cloth in your bucket of warm water mixed with a small amount of mild dish soap or cleaning product (a few drops is all you need). Ring out excess water so the cloth is not sopping.
Wipe down the inner and outer areas of the window tracks to clean off remaining dirt and built-up grime. Try wrapping the cloth around an old toothbrush, chopstick or cotton swab to scrub in the crevices and corners.
You may need to rinse and repeat the soapy wiping several times to remove stubborn dirt. Make sure to wipe both the stationary and moveable window track pieces.
Step 3: Dislodge Stuck-On Debris
Check the tracks for any remaining debris that didn’t come off with wiping, such as bugs, hardened dirt globs, or other stuck-on gunk. Use tweezers, a small screwdriver, plastic putty knife or other tools to gently dislodge and scrape any clingy debris out of the tracks.
You want to remove all stuck-on debris so it doesn’t obstruct smooth window opening and closing. Just be very gentle when scraping to avoid damaging the tracks.
Step 4: Clean Track Grooves and Crevices
For tracks with a deeper grooved design, use a chopstick, toothbrush handle or other thin tool to scrub down in the grooves and corners.
Really work the brush back and forth to force out all the collected dust and gunk lodged inside. The grooves are a magnet for compacted debris. Thorough scrubbing will help fully clean them out.
Step 5: Dry and Vacuum Again
As a final step, take a clean, dry microfiber cloth and go back over the tracks to dry them and remove any last dirt particles or soap residue.
Once dry, run the vacuum nozzle attachment over the tracks one more time to suck up any final dust and dirt that was dislodged when scrubbing.
And that’s it! Just five simple steps to refresh and renew your window tracks.
Quarterly Cleanings For Maintenance
To keep your freshly cleaned window tracks looking neat and functional over time, repeat these steps about once every 3 months. Seasonal cleanings will help prevent heavy buildup of dirt.
More frequent cleaning may be needed if you have:
- Windows that are frequently opened/closed
- Windows exposed to elements like trees/dirt
- Lots of windblown pollen or dust
- Pets or smokers in the home
- Severe hard water deposits
Use your own judgment based on your climate and living conditions. Light cleanings can be done more often as needed.
Tips and Tricks for Cleaning Window Tracks
Follow these tips and tricks to get your window tracks extra clean and keep them that way:
- Vacuum using crevice tool – Use the thin crevice attachment on your vacuum to reach into tight spaces.
- Soak tough dirt – For stuck-on dirt and grime, let the tracks soak for 5-10 minutes after spraying on cleaner or soapy water before wiping.
- Use old toothbrush – An old toothbrush works great for scrubbing in grooves. Also use cotton swabs for tight spots.
- Try baking soda – For extra cleaning power, make a thick baking soda paste with water. Let sit before rinsing.
- Rinse with clean water – Always wipe tracks with plain water after soapy cleaning to rinse off residue.
- Squeegee and towel dry – Use a rubber squeegee and towel to thoroughly dry tracks after cleaning.
- Vacuum outside too – Don’t forget to vacuum dirt off the exterior window sills and frames as well.
- Degrease oil buildup – For oily tracks, use an all-purpose cleaner or diluted degreasing dish soap.
- Prevent future buildup – Install tight screens and close windows during windy/rainy weather to prevent extra debris blowing in.
Deep Cleaning for Severely Dirty Window Tracks
If your window tracks have years of heavy buildup, additional deep cleaning steps may be required:
- Soak in hot vinegar water – Mix 1 part white vinegar with 3 parts hot water. Generously spray/brush on and let soak for 10-20 minutes before scrubbing clean. The vinegar will help dissolve mineral deposits.
- Use baking soda paste – Form a paste with baking soda and water. Apply and let it fizz on dirt for 2-3 minutes before scrubbing and rinsing. Baking soda has light abrasive properties to help lift grime.
- Remove screens first – Take out window screens to make cleaning easier. Make sure to thoroughly clean screen frames and mesh separately before putting screens back.
- Use plastic putty knife – For paint splatters, thick gunk or glue residue, carefully scrape with a soft plastic putty knife to avoid scratching.
- Try lubricating oil – Rub a bit of lightweight lubricating oil on the tracks with a cloth to help loosen stuck debris and reduce friction when operating windows. Wipe off any excess.
- Steel wool for rust spots – Use very fine 000 grade steel wool to gently buff off any rust spots. Wear gloves to avoid slivers.
- Replace damaged weatherstripping – Remove and replace any worn weatherstripping around the frames to maintain the seal. Compressing old, hardened weatherstripping can damage the windows during cleaning.
With some elbow grease, even badly neglected window tracks can be restored to like-new condition. Just take your time and be gentle on old degraded surfaces.
Cleaning Window Tracks by Frame Material
Certain cleaners and scrubbing tools work better for some window frame materials than others:
Vinyl Window Tracks
Vinyl window frames are lower maintenance and resistant to damage. Use:
- Warm, soapy water
- Soft microfiber cloth
- Non-abrasive scrub brushes
- Avoid ammonia, bleach and abrasive pads
Wood Window Tracks
For wood frames, take care to avoid excessive water and scratching. Use:
- Dust vacuum attachment
- Soft cloth with mild cleaner
- Toothbrush or cotton swabs for crevices
- Avoid excessive water or harsh chemicals
Aluminum Window Tracks
Aluminum withstands strong cleaners and frequent washing. Use:
- Warm, soapy water
- Stainless steel cleaner/polisher
- Non-abrasive scrub pad or brush
- Rinse well and dry completely
Fiberglass Window Tracks
Fiberglass tracks can be cleaned like aluminum but avoid harsh alkaline chemicals which can damage the gelcoat over time.
When in doubt, start with the gentlest cleaning method first, and test scrubbing tools/cleansers in an inconspicuous area to ensure they won’t damage the frame finish.
Cleaning Window Tracks in Hard Water Areas
In regions with mineral-rich hard water, window tracks easily accumulate whitish lime and calcium deposits over time. To remove:
- Spray on straight white vinegar full-strength and let soak for 15-20 minutes – the acetic acid in vinegar will help dissolve mineral deposits.
- Use a soft cloth or an old toothbrush dipped in vinegar and scrub off the mineral residue.
- For stubborn buildup, make a paste with white vinegar and baking soda – the chemical reaction helps lift deposits. Scrub paste on and rinse.
- An all-purpose cleaner with citric or phosphoric acid added will also help remove hard water stains and discoloration.
- Install water softening systems to reduce future hard water staining.
With some persistent scrubbing, you can eliminate those unsightly hard water stains from your window tracks.
Safety Tips for Cleaning Windows and Tracks
To safely clean windows and tracks:
- Use caution when cleaning windows over sink, range or plumbing fixtures in case of glass breakage.
- Open windows first for ventilation when cleaning. Avoid breathing in fumes from chemical cleaners.
- Wear gloves to protect hands from harsh cleaning agents. Rinse hands after.
- Wear eye protection to avoid splashes of cleaning solutions.
- Use a sturdy step stool or ladder to reach high windows. Never climb on furniture.
- When washing outdoor windows on upper floors, close lower windows to avoid dripping on passersby.
- Never mix bleach or ammonia-based cleaners together, as toxic vapors can form.
- Keep cleaners out of reach of children and pets.
- Avoid leaning too far out of open windows and take precautions against falls.
- Wipe down screens carefully to avoid tearing mesh. Remove screens if needed for easier cleaning.
With some common sense safety measures, window and track cleaning can be done securely.
Conclusion
Learning how to effectively clean window tracks helps maintain the beauty, function and longevity of your windows. Just follow these easy steps:
- Vacuum out all loose debris
- Wipe down tracks with warm soapy water
- Dislodge any remaining stuck-on gunk
- Scrub grooves and crevices
- Dry tracks and vacuum again
Do this a few times per year, or more often if tracks are excessively dirty. With minor effort, you can enjoy clean, smooth-sliding windows that let the light shine through.
So grab an old toothbrush, make some soapy water, and get scrubbing – your fresh, dirt-free window tracks will be sparkling in no time!
Frequently Asked Questions
How often should I clean window tracks?
- For maintenance cleaning, wipe window tracks every 2 to 3 months. More frequent cleaning may be needed for excessively dirty tracks or high-traffic windows. Do a quick vacuum as needed of tracks to remove surface dust between full cleanings.
What’s the best way to clean window tracks?
- An effective cleaning method is vacuuming, washing with warm soapy water, dislodging stuck debris, scrubbing crevices with an old toothbrush, and a final dry and vacuum. For really dirty tracks, let them soak in hot vinegar water before scrubbing.
What home remedies can I use to clean window tracks?
- Home remedies like warm vinegar water, diluted dish soap, baking soda paste, or lemon juice can all help dissolve and lift dirt from tracks. Pair remedies with scrub brushes, microfiber cloths and elbow grease for best results.
How do I clean metal window tracks?
- For metal window tracks, wipe down with a soft cloth dampened in a solution of warm water and a few drops of mild dish soap. Gently scrub with a soft brush, then rinse well, dry completely, and polish metal shiny again with a stainless steel cleaner.
Should I remove window screens before cleaning tracks?
- Yes, removing window screens first makes it much easier to access and clean all surfaces of the window tracks thoroughly. Just be sure to carefully clean screen frames and mesh separately before reinstalling.
How should I clean sticky window tracks?
- To clean sticky window tracks, try wiping down the tracks with isopropyl alcohol using a soft cloth. This will help dissolve adhesive residues. For silicone caulk stickiness, use denatured alcohol instead. Scrub any remaining tacky spots with an old toothbrush.
My windows won’t slide after cleaning the tracks – why?
- If windows are hard to open after cleaning, make sure all soap residue is fully rinsed away, and tracks are completely dried with a towel. A small amount of lubricating spray or wax can also be used sparingly to help windows glide more smoothly.
What’s the quickest way to clean window tracks during a season change?
- For a quick seasonal window track refresh, simply vacuum thoroughly using a handheld crevice tool, then wipe with microfiber cloths dampened with a 50/50 mix of vinegar and water. Wipe dry when done. This will remove surface dust and grime in minutes.